Blackout Tint Window Film Privacy Block Sun UV Protection Sleep Aid

Description

TOTAL BLACKOUT PRIVACY GLASS WINDOW FILM BLOCK OUT 100% LIGHT BLACK TINT TINTING
Total solid gloss blackout from both inside and out.
Gives total privacy, you can not see in or out at all.
Does not allow any light at all in or out.
This film are self-adhesive, you can use it in your homes, cars, shops, offices and building windows .
The film will give you privacy. The film is very easy to install.
Worldwide Free Delivery
•  Professional quality
•  Easy DIY install.
•  Self Adhesive Film
•  Easy to cut & trim to size
•  Allows one way viewing in correct lighting conditions
FITTING INSTRUCTIONS
Tools needed:
Knife
Spray bottle containing water with a few drops of washing up liquid ‘Slip Solution’
Squeegee
Method:
1) Thoroughly clean the window the film will be applied to.
2) Cut your film to size of the window, adding an extra 2cm to the width and height.
3) Remove the clear lining film from back of the window film and spray the adhesive back of the film, as well as your fingers, with the Slip Solution.
Attach a piece of sticky tape to either side of the film at one corner and peel them apart.
4) Spray the glass with the Slip Solution.
5) Apply the adhesive side of the film onto the glass and slide into position.
6) Spray the face of the film with the Slip Solution and using a squeegee, push out all the soapy water from behind the film
7) Trim off any excess film using the knife