CONDEC PCM1000-1 w/ UPS3000AGA Pressure Indicator Calibrator

Description

Condec UPS3000BC Pressure Indicator Calibrator - 1000 PSI - NF47. Condition is "Used". Shipped with USPS Priority Mail.
Eaton/Condec UPS3000BAA 5000/2500/1000 PSI Pressure Standard/Calibrator
Comes with what you see in the pictures. If you don't see it, you probably won't get it.
Specifications are from a 3rd party and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
This unit is ready to ship! It has been tested and is guaranteed to work for 30-days, parts and labor, excluding freight. The unit had a new battery installed on 11/18.
The Unit's Serial Number Tag Reads:
Model Number:
UPS 3000 BAA
Serial Number:
A1800
Power Requirements:
117 VAC, 50/60 Hz
Date:
22/90
Breakdown by Part Number:
Model Type:
Basic
Power:
Battery operation & 115 VAC, 50/60 Hz
Pressure Range:
5000/2500/1000 psi
Calibration Modes:
Gauge only
Feature:
±0.05% F.S. accuracy
16 gauge mild steel case
No potentiometers or analog adjustments for calibration
Push button zero
5000/2500/1000 PSI range set
0.02% F.S. display resolution typical for each range
Gauge only calibration mode
Applications:
Transfer standard
Pressure monitor
Pressure switch testing
Relief testing
Description:
The Condec UPS3000 Series Digital Pressure Indicators are Designed for use in the manufacture, test or calibration of pressure sensitive devices, the UPS3000 series incorporates an exclusive bonded foil strain gauge sensor and microprocessor-based electronic circuitry for long-term stability. In addition, each model offers three independent anges for accuracy within 0.05%.
Housed in a durable, steel enclosure, the UPS3000 series remains compact and lightweight for a balance of long lasting, portable use. The self-contained rechargeable battery option guarantees over six hours of convenient operation wherever your work takes you. Different technicians can calibrate the same transmitter and get identical results.
From pressure switches to burst discs, relief valves to transmitters, the UPS3000 series promises years of dependable performance at an affordable price.
Specifications:
Available Pressure Calibration:
Gauge only
Overall Accuracy:
±0.05% F.S. maximum each range. Accuracy statement includes all effects of linearity, hysteresis, repeatability, and ambient temperature.
Temperature Range:
Operating:
40°F to 140°F (4°C to 60°C)
Storage:
0°F to 185°F (-17°C t 85°C)
Relative Humidity:
95%, non-condensing
Pressure Media:
Any media compatible with 17-4PH stainless steel
Pressure Sensor Type:
Bonded, metal foil strain gauge or equal
Pressure Connection:
Pressure fitting: 7/16-20UNF-2A: 37° flare; AN-4
Overpressure Capability:
750% on low range, 300% on mid range, 150% on high range
Numerical Pressure Display:
Digital Type:
High intensity, red LED, 0.43" high
Active Digits:
Five full decaes
Polarity Indication:
"-" sign
Pressure to Digital Conversion:
Conversion Rate:
Data updated at the rate of 12 timers per second, nominal
Display Resolution:
Nominally 0.02% of F.S. for each pressure range
Input Voltage:
115 VAC, ±10%, 50/60 Hz
Power Consumption:
8 watts, typical
Line Filter:
Line to line and line to neutral
Mounting Style:
Table top with rubber feet
Construction:
Single piece outer case with slide out drawer
Case Material:
16 gauge, mild steel with textured finish, baked epoxy enamel paint
Multi-Conversion:
10 units can be stepped through at the touch of a button. psi, kPa, mmHg, BAR, mBAR, inHG, cmH
2
O, Kg/cm
2
, inH
2
O, and % F.S. are included. Replaces analog pressure display.
Weight:
Approx. 13 lb (5.8 kg)
Peak Hold:
Last highest pressure reading stored in memory and recalled at the touch of a button. Calibrates burst discs and relief valves.
Freeze Mode:
External switch contact, change of state, freezes display reading for three seconds. Calibrates pressure switches.
Battery:
Self-contained rechargeable battery provides a minimum of six hours of completely portable usage. May be operated or recharged by connecting the power cord to 115 VAC. Handle, power switch, and low battery indicator includes with this option.
Outputs:
Analog:
4-20 mA, 0-10 VDC, 0-5 VDC
Digital:
Parallel BCD, 20 mA loop, RS-232 simple output
Min/Max:
Highest and lowest pressure readings stored in memory and recalled at the touch of a button.
Dimesnsions:
10.81" W x 4.93" H x 9.9" D (274.57 mm x 125.22 mm x 251 mm)