Druck DPI 610 Pressure Calibrator 7bar

Description

Pressure Calibrator Druck DPI 610IS.
Good condition. Power up tested only. Batteries not included.
(Please Note: This item is used and may have marks, scratches, small dents, scuffs or other cosmetic defects as to be expected from a used item. Please see photos.)
Unit is in working/operating condition. If you look closely on the screen one pixel line is not active, which probably can be fixed by reattaching screen connectors inside, but this does not influence the unit operation, readings are visible quite clearly,
screen response is normal and not influenced,
so unit was used without fixing this issue. Unit sold as seen on the picture, everything you get is on the pictures. If needed I can make a video of operation, switching between modes, pump operation etc.
The rugged weatherproof design is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and a built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops.
Using external electrical connections, the Druck DPI 610-PC IS intrinsically safe pressure calibrator measures ±30 volts d.c. and ±55 mA. An integral sensor provides measurement of ambient temperature. Additional sensors (option B1) connect to an external connector and extend the pressure measurement range and include differential pressure measurement.
Intrinsically Safe versions, certified to European and North American standards for use in hazardous areas, reduce response times to breakdowns and emergencies by removing the need for ’Hot Permits‘ and gas detection equipment. This gives peace of mind to all those responsible for safety within hazardous areas.
Ranges: -850 mbar to 7 bar capability.
Accuracy: 0.025% F.S.
Dual readout: input and output.
4 - 20mA loop test: auto step and ramp.
Display: 60 x 60 mm (2.36” x 2.36”) LCD Graphics.
Power supply: Batteries 6 x 1.5 V C cells, alkaline (up to 60 hours nominal use at 20°C). not included.
Dimensions: 300 x 170 x 140 mm (11.8” x 6.7” x 5.5”).
Weight:  3 kg (6.6lb).
Let me knw if you have any questions